Home |
SiteMap |
Contact |
|||||||||||||
Rack Hat™ The Rack Hat™ containment system separates hot and cold airflow by partitions mounted from the drop-ceiling grid. The partitions form a rectangle around the aisle. Aluminum tracks are mounted to the drop-ceiling grid as a means to attach a |
|||||||||||||||
The aluminum track is connected to the ceiling with three links: a 360° sliding ball, a thermal link and a twist ceiling grid attachment. | |||||||||||||||
The fire resistant vinyl drop-down material overlaps where the aluminum track is connected to create one continuous partition. |
|||||||||||||||
The aluminum track is design with a continuous running top slider so that a connection to the ceiling can be made at any point along the track |
|||||||||||||||
The aluminum track is designed to link together with a center splicer so as to create one continuous track system. The Rack Hat™ is a MODULAR ASSEMBLY SYSTEM that ships in standard sized kits. Each kit comes with all the material necessary to cover a specific area. Kits have two important measurements:
Each kit connects together with both an aluminum splicer and a 1-inch vinyl overlap. Drop down lengths range from24 inches to well over 10 feet.
How to Design Containment Containment systems are designed to form a rectangle around the aisle (hot or cold). The Rack Hat™ comes in kits with two key measurements: 1) Length (in feet) of aluminum support track 2) Length (in inches) of the drop down material. Starting at one corner of the rectangle determine how many kits are required to cover an area of the same drop down length. Adjust to different kit sizes to fit drop down lengths of a different size. The fire resistant vinyl comes in these standard drop-down sizes:25, 52, 94, 108, 120, 144, 180 (inches). The aluminum track comes in 1-6 feet. |
|||||||||||||||
Copyright © 2010 JPT Global Solutions Ltd. |
|||||||||||||||